Vision Mark Organic

It is a dry free flowing powder contains concentrated source of free flowing hydrolytic enzymes and ten strains of natural bacteria that are genetically capable of producing enzymes in waste water treatment systems under aerobic and an aerobic conditions. It is used for reducing BOD, COD levels as well as reducing the sludge volumes odoor and color in the effluent and sewage treatment plants. Waste water treatment has assumed great significance in today's context, where protecting the environment is a prime concern. The main objective of the waste water treatment is to treat the effluent before it is discharged so that the environment is not polluted. Waste water treatment in general refers to treatment of suspended and floatable material, treatment of biodegradable organics and the elimination of pathogenic organisms. The contamination in the waste water are removed by physical, chemical and biological means, these organisms are effectively removed by Pro-Envy Plus.BENEFITS:Ø Sludge volume will be reduced more, as more solids are digested. Ø Remove bad odor.Ø Sludge will be easier to pump, process and dewater and will have less odor too. The capacity of the system will be effectively increased, because more waste can be processed, more effectively in, in less time.Ø Easier to balance the treatment system.Ø Bacterial oxidation of the liquid phase will be faster and more complete. Digesters will operate evenly and uniformly , easier planning and routine waste.

Recommendation For: Oxidation lagoons,  Grease taps,  Aeration tanks,  Imhoff  tanks, Digesters, Septic tank,  Clarifiers, Trickling  filters,  Sludge pits etc.

Application Process:
Dosage rate will vary with retention times BOD / COD ranges, water temperature, pH, sludge build up and pond depth.Ø For one lakh L TR of effluent, Use 20 ppm i.e 2 Kgs of Pro-Envy Plus Per day .Ø For 06 alternative days dosage. From 13th day onwards weekly twice 05 ppm i.e 500 gm Pro-Envy Plus.Ø Normal preventive maintain rates are based on the following criteria as Minimum retention time of 5 days BOD ranges of 150000 – 40 ppm with pH of 3-12.
DIRECTIONS FOR USE:It should be activated by mixing them in a bucket of warm  water for few minutes. Pour the slurry into the system at a  point where normal water flow will disperse it evenly . The  best way is to pour it into the waste stream inside the plant  or just before it flows out into the plant / pour it directly into  the middle of the pond or around the perimeter . Bad odours and sludge accumulations take months and years to build up, and it will take some time to get rid of them, begin the treatment with double the weekly normal dosage for a period of 3-4 weeks, after seeing a significant improvements and can cut back to normal weekly dose. Severe accumulation of sludge may take one / more years to get eliminated.
NOTE:The product is to be used in a waste treatment system with a continuous flow and hydraulic retention of less than 24 Hrs. The products may be soaked in luke warm water at 30 degree C for 8 hrs in 1 % water solution to activate the biological components and to allow the bacteria to get a start. Soaking period of over 10-12 hrs is recommended.In multiple level applications it is recommended to dose at the lowest level first. The point of application should be in an area which allows the product maximum time in the system.

Additional Information:

• Production Capacity: 1000 Lit Per Day
• Delivery Time: 3 to 4 Days After Confirmation of Order.

bkc chemical is a version of benzalkonium chloride in aqueous solution. It is best known, and widely used, as a germicide Quaternary ammonium. It is used in topical preparations in the pharmaceutical, veterinary and cosmetic industries. As a bactericide, is an active ingredient in detergent formulations – disinfectants, household and hospital disinfectants, as well as in water treatment pools and cooling towers.
Inorganic Chemistry is our strength and all the products are manufactured considering requirement of Application and Industry in Various Grades.
Application and Uses of  bkc chemical:

1. BKC is used in pharmaceuticals such as leave-on skin antiseptics
2. BKC is used as antiseptic in Bactine to safely treat childhood scrapes and cuts
3. BKC is used in advanced, next generation hand sanitizers
4. BKC is used in hygienic towelettes and wet wipes
5. BKC is used in cosmetics such as eye and nasal drops, as a preservative
6. BKC is used in cleaners for floor and hard surfaces as a disinfectant
7. BKC is used in high-level surgical instrument sterilizing and disinfection solutions
8. BKC is used in air and surface spray able disinfectants

Additional Information:

• Production Capacity: 1000 Lit Per Days
• Delivery Time: 3 to 4 days after confirmation of Order
• Packaging Details: 50 kg drum

pH Boosters are liquid alkaline formulation, used as alkalinity source for boiler feed water. It is synergized with properties of pH booster and water conditioning. It have unique pH adjusting qualities and uses and distribution throughout the steam plant helps to protect from corrosion. It is often used in conjunction with low concentrations of hydrazine or ammonia to provide a comprehensive all-volatile treatment chemistry for corrosion protection for the steam systems of such plants. It decomposes reasonably slowly in the absence of oxygen at the high temperatures and pressures in these steam systems. Boiler water pH booster or alkalinity builder is a multipurpose Boiler Water Treatment Chemical that increases the alkalinity and pH of boiler water for corrosion inhibition and also aids in removal of sludge or boiler deposits and prevention of scaling in boiler tubes. Normally the Boiler feed water pH should be at 9.5-10 for avoiding boiler tubes corrosion or rusting due to acidic attack.

Additional Information:

• Production Capacity: 1000 Kgs per Day
• Delivery Time: 3 to 4 Days after confirmation of Order.

1. It is used as a partial replacement for inorganic coagulant such as alum, lime etc 2. It is used full replacement of inorganic coagulant where there are stringent environmental regulations.3. It  can be used in dyeing and finishing auxiliaries as an advanced formaldehyde free colour fixing agent and can form film in the fabric and improve colour fastness.4. It  also can be used in decolour flocculate in water treatment ( Drinking and waste water)

Application in:
1.Organic Flocculants and coagulant2.colour precepitant 3.Sludge setteler

Additional Information:

• Production Capacity: 1000 Lit Per Days
• Delivery Time: 3 to 4 days After confirmation of Order
• Packaging Details: 50 kg Drum packing

It is a dry free flowing powder contains concentrated source of free flowing hydrolytic enzymes and ten strains of natural bacteria that are genetically capable of producing enzymes in waste water treatment systems under aerobic and an aerobic conditions. It is used for reducing BOD, COD levels as well as reducing the sludge volumes odoor and color in the effluent and sewage treatment plants. Waste water treatment has assumed great significance in today's context, where protecting the environment is a prime concern. The main objective of the waste water treatment is to treat the effluent before it is discharged so that the environment is not polluted. Waste water treatment in general refers to treatment of suspended and floatable material, treatment of biodegradable organics and the elimination of pathogenic organisms. The contamination in the waste water are removed by physical, chemical and biological means, these organisms are effectively removed by Pro-Envy Plus.BENEFITS:Ø Sludge volume will be reduced more, as more solids are digested. Ø Remove bad odor.Ø Sludge will be easier to pump, process and dewater and will have less odor too. The capacity of the system will be effectively increased, because more waste can be processed, more effectively in, in less time.Ø Easier to balance the treatment system.Ø Bacterial oxidation of the liquid phase will be faster and more complete. Digesters will operate evenly and uniformly , easier planning and routine waste.

Recommendation For: Oxidation lagoons,  Grease taps,  Aeration tanks,  Imhoff  tanks, Digesters, Septic tank,  Clarifiers, Trickling  filters,  Sludge pits etc.

Application Process:
Dosage rate will vary with retention times BOD / COD ranges, water temperature, pH, sludge build up and pond depth.Ø For one lakh L TR of effluent, Use 20 ppm i.e 2 Kgs of Pro-Envy Plus Per day .Ø For 06 alternative days dosage. From 13th day onwards weekly twice 05 ppm i.e 500 gm Pro-Envy Plus.Ø Normal preventive maintain rates are based on the following criteria as Minimum retention time of 5 days BOD ranges of 150000 – 40 ppm with pH of 3-12.

DIRECTIONS FOR USE:It should be activated by mixing them in a bucket of warm  water for few minutes. Pour the slurry into the system at a  point where normal water flow will disperse it evenly . The  best way is to pour it into the waste stream inside the plant  or just before it flows out into the plant / pour it directly into  the middle of the pond or around the perimeter . Bad odours and sludge accumulations take months and years to build up, and it will take some time to get rid of them, begin the treatment with double the weekly normal dosage for a period of 3-4 weeks, after seeing a significant improvements and can cut back to normal weekly dose. Severe accumulation of sludge may take one / more years to get eliminated.

NOTE:The product is to be used in a waste treatment system with a continuous flow and hydraulic retention of less than 24 Hrs. The products may be soaked in luke warm water at 30 degree C for 8 hrs in 1 % water solution to activate the biological components and to allow the bacteria to get a start. Soaking period of over 10-12 hrs is recommended.In multiple level applications it is recommended to dose at the lowest level first. The point of application should be in an area which allows the product maximum time in the system.

Additional Information:

• Production Capacity: 1000 Kg Per Day
• Delivery Time: 3 to 4 Days After Confirmation of Order.

Defoamer Agent is a crucial requirement for manufacturers in many industries: crop protection, oil & gas, pulp making, chemical processing, effluent treatment, recycling, textiles & leather, food and beverages, cleaning products, etc.

Our full line of foam control formulation ingredients and processing aids also make manufacturing more efficient and cleaner. Improve the quality of final products, reduce waste and energy consumption, and facilitate recycling. They are safe for people and equipment and comply with the strictest standards. They perform under challenging conditions such as high temperatures and high pH values.

Our Defoamer Agent based defoamers used as well as in various industrial applications to control or to eliminate foam generation, thereby optimizing productivity. They perform under challenging conditions such as high temperatures and high pH values.

Additional Information:

• Production Capacity: 1000 KGS per Day
• Delivery Time: 3 to 4 days After Confirmation of Order
• Packaging Details: 50 KGS Drum